datasheet | august 2012 fiber optics | rev 2012.08 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. applications high performance supertrunking links high power distri bution networks redundant ring architectures fttx networks fiber deep architectures features full function fiber optic amplifier ready for integration low noise figure (typ < 6.0 db) pin: -10 dbm to +12 dbm pout: +27 dbm to +37 dbm standard rs-232 communication low electrical power consumption input/output isolation > 40/40 db polarization dependant gain (pdg) < 0.1 db polarization mode dispersion (pmd) < 0.5 ps input & output return losses < -40 db wavelength: 1545 nm to 1562 nm mafa 3000 series erbium doped fiber micro amplifier emcore?s mafa 3000 series erbium doped fiber amplifier (edfa) gain block module is an ideal building block for oem sy stem integrators. the family of mafa 3000 edfa gain blocks is designed to meet the most demanding noise performance requirements of special and catv applications, and performs all the functions required of a high power optical amplifier for system integration. mafa 3000 series edfa gain blocks provide optical isolation on the input and output of the gain block for stable, low noise operation. the input and output optical signal power levels are detect ed for monitoring and control. the input optical signal is amplified with active gai n control for a constant output power level or with active output power control for constant gain mode operation. the mafa 3000 series edfa gain blocks also provide monitors and associated alarms for all vital characteristics. the optical output of the mafa 3000 series edfa gain blocks can be split into multip le ports by an optional external splitter. small mechanical footprint allows using th is unit in very tight space environments. mafa 3000 se r ies edfa
datasheet | august 2012 fiber optics | rev 2012.08 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. optical/electrical characteristics 1 property unit limit models comments 3037 3030 3032 3033 3035 3037 operating input power pin (dbm) max 12 12 12 12 12 12 operating input power pin (dbm) min -10 -10 -10 -10 -10 -10 typical (may vary for some models) output power po(dbm) nominal 27.0 30.0 32.0 35.0 35.0 37.0 note 2 noise figure nf (db) typ/max 5.5/6.0 5.5/6.0 5.5/6.0 5.5/6.0 5.5/6.0 5.5/6.0 (notes 3) static gain flatness gs (db) max +/-2.0 +/-2.0 +/-2.0 +/-2.0 +/-2.0 +/-2.0 (notes 4) dynamic gain flatness gd (db) max +/-2.5 +/-2.5 +/-2.5 +/-2.5 +/-3.0 +/-3.0 (notes 5) output power stability (db) max +/- 0.2 +/- 0.2 +/- 0.2 +/- 0.2 +/- 0.2 +/-0.2 (note 6) power consumption (steady state) psys(w) max 20 12 28 18 35 25 45 35 48 38 55 45 70 o c case (premium) 55 o c (economy) remnant pump power to output prp(dbm) nom < -30 < -30 < -30 < -30 < -30 < -30 notes: 1. unless stated otherwise, all specif ications apply over the full operating temperature and humidity ranges 2. depending on the fiber optic patchcord interface the measur ed value can vary up to 0.5 db from the actual value. 3. measured with input optical signal with pin 0 dbm and ? 1550 nm @ 25 ? c. may vary for some models. 4. measured with a swept probe signal (pp), where pp 0 dbm @ 25 ? c. may vary for some models. 5. measured with a swept probe signal (pp), and a fixed tone signal (pt) @ ~ 1550 nm; (pt pp+20 db; pt + pp 0 dbm) @ 25 ? c 6. over polarization and specified temperature range. 7. premium version ? mafa (with cooled pumps). economy version ? mafa (with uncooled pumps). general and mechanical specifications property requirement comments operating wavelength 1545 nm ~ 1562 nm standard operating case temperature -40 ? c to 75 ? c -10 ? c to 65 ? c premium econom y storage temperature -40 ? c to 85 ? c operating humidity 20% to 85% non-condensing +5.0v +/-5% all versions voltage supply range +24v +/-5% all versions (efficiency: 75% for mafa 3030; 90% for mafa 3037) optical connectors sc/apc; fc/apc; e2000/apc user specified (for mafa 3032, mafa 3033, mafa 3035 and mafa 3037, if used separately, only special high power patchcord is absolutely recommended) dimensions (in) 9. 5?w x 6.7?d x 1.5?h mafa 3030 to mafa 3037 unit height depends on heatsink used mafa 3000 series edfa
datasheet | august 2012 fiber optics | rev 2012.08 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. outline drawing electrical connector pinout pin # designation pin # designation 1 dc power input (+5v/+24v) 16 gnd 2 dc power input (+5v/+24v) 17 gnd 3 dc power input (+5v/+24v) 18 rs-232 tx 4 dc power input (+5v/+24v) 19 reserved* 5 key-switch 20 output optical power mute 6 reserved* 21 amplifier disable input 7 reserved* 22 rs-232 rx 8 reserved* 23 reserved* 9 reserved* 24 dc power input (+5v/+24v) 10 reserved* 25 gnd 11 reserved* 12 dc power input (+5v/+24v) 13 gnd 14 gnd 15 gnd mafa 3000 series edfa
datasheet | august 2012 fiber optics | rev 2012.08 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. compliance and reliability information en 55013: sound and television broadcast rece ivers and associated equipment ? radi o disturbance characteristics ? limits and methods of measurements ? elec tric field radiation emissions (2001) fcc: subpart b. part 15 class ?a ?: unintentional radiators en 61000-4-3 radiated immunity en 55020 conducted immunity en 61000-3-2 harmonics en 50083-2, 1995 with amendment 1 fit rate: 90% level of confidence <3500 @ 30 ? c ordering information mafa30 - - - example: mafa3032-sc-e-1: 32 dbm edfa gain block with sc/apc c onnectors, economy pumps, +5vdc power supply note: as shown on the outline drawing above the option with 2 optical output ports is also possible . power level connector option class power supply 27 - 27 dbm sc - sc/apc 30 - 30 dbm fc - fc/apc 32 ? 32 dbm ec ? e2000/apc 35 ? 35 dbm ecd ? e2000/apc diamond 37 - 37dbm p ? premium e - economy 1 - +5vdc 2 - +24vdc mafa 3000 series edfa
|
